Call us to get tree support such as tree clean, tree haul, bush mulch, shrub clearance, stump removal and many other all over United States.


Call us

Call now +1 (855) 280-15-30






To do this method, start by cutting your boards to six.

Aug 31, You can hire a firm to come in with a large mechanical grinder to churn the stump into sawdust, but this can be expensive. Commercial stump removal can cost as much asfor a large stump or one in a tricky location. You could also rent a stump grinder fortoper day, but getting this tool on-site and using it safely is no easy feat.

Drill Holes in the Stump.

Step 5: Grind it down about 4 inches using the grinder wheel and repeat until the entire perimeter of the stump is 4 inches below the ground.

Cut off as much of the top of the stump as possible with your chainsaw. Use a 1-inch spade bit with a spade bit extension to drill evenly spaced holes roughly every 6 to 8 inches around the perimeter of the stump. Make the holes about 12 inches deep and Estimated Reading Time: 3 mins. It quickly chips the wood of the stump into a pile of debris. As you figure out how to remove a tree stump, carefully review the manufacturer’s instructions for the stump grinder.

Drive the teeth close to the stump and turn on the machine. Raise the cutting wheel of the grinder a few inches above the front edge of the stump with the brake lever. Oct 01, Use a 1-inch spade bit to drill a series of inch-deep holes about 3 to 4 inches back from the edge of the stump, spaced every 6 to 8 inches.

Then, drill angled holes through the face of the stump coming in from the sides to intersect with the vertical holes. Apr 22, Soften the Stump. A commercial stump remover or plain ole saltpeter (aka potassium nitrate) will soften the wood and make it amenable to a slow and thorough burn. Using a drill with a 1-inch bit eight to twelve inches long, drill deep holes in the top of the stump.

Alternate between the shovel, digging bar, and mattock to reveal the roots around the stump.

Jun 12, First, make sure the stump is dead by waiting at least a month after cutting the tree. Create a few holes in true value stump remover, 2493 Weston MA top of the stump using a drill or a wood splitter. Surround the stump with a.